Came home to a pile of packages! - BMW G310 R/GS Forum
 9Likes
Reply
 
LinkBack Thread Tools
post #1 of 12 (permalink) Old 06-12-2018, 08:41 PM Thread Starter
Junior Member
 
LVPhx's Avatar
 
Join Date: May 2018
Posts: 20
Came home to a pile of packages!

Came back home to a nice bunch of packages and immediately dug in and started installing. List includes:

R&G Radiator Guard
R&G Tail Tiday
Sequential LED Turn Signals
Oversized Footpegs
Adjustable and Foldable Levers
Dominator HP3 Exhaust
New Top Case
Tank Knee Grip Pads
Progrip Gel Dual Sport Grips

Still waiting on the center stand, bar risers, hand guards and engine bars. I think this stuff will hold me over for now though. =P
Attached Thumbnails
Click image for larger version

Name:	20180607_160823_1528849570899.jpg
Views:	302
Size:	121.4 KB
ID:	9866   Click image for larger version

Name:	20180607_145438_1528849649307.jpg
Views:	274
Size:	135.9 KB
ID:	9870   Click image for larger version

Name:	20180612_172803_1528849739401.jpg
Views:	297
Size:	169.0 KB
ID:	9872   Click image for larger version

Name:	20180612_172821-01_1528849906431.jpg
Views:	301
Size:	159.5 KB
ID:	9874   Click image for larger version

Name:	20180612_173941_1528850396160.jpg
Views:	286
Size:	117.5 KB
ID:	9876  

LVPhx is offline  
Sponsored Links
Advertisement
 
post #2 of 12 (permalink) Old 06-13-2018, 02:42 AM
Senior Member
 
Join Date: Mar 2018
Posts: 163
Quote:
Originally Posted by LVPhx View Post
Came back home to a nice bunch of packages and immediately dug in and started installing. List includes:

Tank Knee Grip Pads

Still waiting on the center stand, bar risers, hand guards and engine bars. I think this stuff will hold me over for now though. =P
what is the brand of the grip pads?nice and discrete!
greekgeek is offline  
post #3 of 12 (permalink) Old 06-13-2018, 04:55 AM
Junior Member
 
LiMBRO's Avatar
 
Join Date: Mar 2018
Location: Western Australia
Posts: 16
Quote:
Originally Posted by LVPhx View Post
Came back home to a nice bunch of packages and immediately dug in and started installing. List includes:

Sequential LED Turn Signals
sweet setup!


hows the turn signals?
easy to install? they need the resistors?
and where did you buy it from?


thanks

'17 G310R
LiMBRO is offline  
post #4 of 12 (permalink) Old 06-13-2018, 11:17 AM
Senior Member
 
Tickster's Avatar
 
Join Date: Nov 2017
Location: Leduc Alberta Canada
Posts: 469
I really like the look.
I too have the high rise exhaust, but from Remus. Better sound, weight reduction and looks from OEM in my opinion.
Really like the tail tidy, it's on my wish list.
Best thing about the bar risers that I did not even consider was that it also raised the mirrors up for better visibility.
The handguards too are a must have, as I no longer get bees stuck in between my fingers. 😂

2018 Black 310GS
2011 Royal Enfield Classic with Cozy Bullet sidecar
1981 Honda 400 Homemade Bobber
1978 Honda Naked Goldwing
16 past varieties too numerous to mention
Tickster is offline  
post #5 of 12 (permalink) Old 06-13-2018, 10:28 PM Thread Starter
Junior Member
 
LVPhx's Avatar
 
Join Date: May 2018
Posts: 20
Quote:
Originally Posted by greekgeek View Post

what is the brand of the grip pads?nice and discrete!
I believe the brand is Baretta. I ordered them from eBay but I have recently seen the same set on Amazon. The LH pad has the GS logo on it.

https://rover.ebay.com/rover/0/0/0?m...2F232777109176

Quote:
Originally Posted by LiMBRO View Post

sweet setup!


hows the turn signals?
easy to install? they need the resistors?
and where did you buy it from?


thanks [IMG class=inlineimg]/forum/images/smilies/smile.gif[/IMG]
Turn signals are nice and bright but they do flash a bit fast. I tried them with an 8ohm resistor but it did not affect the speed sadly. Install was straight forward but did involve taking off almost all of the bodywork to do it properly.

Justech 4pcs Universal Flowing Waterproof Motorcycle Motorbike LED Turn Signal Indicator Amber Light … https://www.amazon.com/dp/B07CSS4LLL..._8gDiBb3EP3R6H
LVPhx is offline  
post #6 of 12 (permalink) Old 06-13-2018, 10:34 PM Thread Starter
Junior Member
 
LVPhx's Avatar
 
Join Date: May 2018
Posts: 20
Quote:
Originally Posted by Tickster View Post
I really like the look.
I too have the high rise exhaust, but from Remus. Better sound, weight reduction and looks from OEM in my opinion.
Really like the tail tidy, it's on my wish list.
Best thing about the bar risers that I did not even consider was that it also raised the mirrors up for better visibility.
The handguards too are a must have, as I no longer get bees stuck in between my fingers. 😂
I definitely agree with you about the high mount exhaust. I really wanted the Remus but when I came across this one for $250 I gave it a chance. So far so good, although it is a tad loud. Sounds a lot like my buddy's DRZ400 with an FMF pipe. If you do get the tail tidy be prepared for taking the whole tail section off. The install was much more intensive than the ones on my previous bikes.
Attached Thumbnails
Click image for larger version

Name:	20180601_013838_1528943562431.jpg
Views:	144
Size:	123.0 KB
ID:	9878  
LVPhx is offline  
post #7 of 12 (permalink) Old 06-15-2018, 03:23 AM
Member
 
francoisps's Avatar
 
Join Date: Jun 2018
Location: Melbourne, Australia
Posts: 82
Garage
Quote:
Originally Posted by LVPhx View Post
I definitely agree with you about the high mount exhaust. I really wanted the Remus but when I came across this one for $250 I gave it a chance. So far so good, although it is a tad loud. Sounds a lot like my buddy's DRZ400 with an FMF pipe. If you do get the tail tidy be prepared for taking the whole tail section off. The install was much more intensive than the ones on my previous bikes.
Hey, looks good. I recently had to adjust the gear lever on my G310GS to accommodate new riding boots. To get access to the adjustment nuts I had to remove the rear foot peg frame. I was surprised by the weight of the rear foot peg frame, 1.7 kgs/3.7 pounds. I thought removing them could shave an easy 3.4kgs but the foot peg on the other side also serves as the standard exhaust attachment point. After mounting your high mount exhaust, I assume the rear peg frame is now free to be removed?
francoisps is offline  
post #8 of 12 (permalink) Old 06-15-2018, 09:07 PM Thread Starter
Junior Member
 
LVPhx's Avatar
 
Join Date: May 2018
Posts: 20
Quote:
Originally Posted by francoisps View Post
Hey, looks good. I recently had to adjust the gear lever on my G310GS to accommodate new riding boots. To get access to the adjustment nuts I had to remove the rear foot peg frame. I was surprised by the weight of the rear foot peg frame, 1.7 kgs/3.7 pounds. I thought removing them could shave an easy 3.4kgs but the foot peg on the other side also serves as the standard exhaust attachment point. After mounting your high mount exhaust, I assume the rear peg frame is now free to be removed?
I want to say that it should be able to be removed now but I'm not 100%. I'll take a look at it when I get home tonight and confirm one way or the other.
LVPhx is offline  
post #9 of 12 (permalink) Old 06-16-2018, 02:34 AM Thread Starter
Junior Member
 
LVPhx's Avatar
 
Join Date: May 2018
Posts: 20
Just confirmed that the passenger pegs and supports can be removed when using the high mount exhaust. You weren't kidding either, they are surprisingly heavy! I would suggest either getting a spacer for between the cover and frame or finding shorter bolts as the ones on the right side get close to the swing arm and the left very close to the chain.
Attached Thumbnails
Click image for larger version

Name:	20180615_232731_1529130812915.jpg
Views:	145
Size:	110.7 KB
ID:	9944   Click image for larger version

Name:	20180615_232742_1529130825484.jpg
Views:	128
Size:	101.1 KB
ID:	9946   Click image for larger version

Name:	20180615_232753_1529130840075.jpg
Views:	128
Size:	115.0 KB
ID:	9948   Click image for larger version

Name:	20180615_233127_1529130864005.jpg
Views:	112
Size:	105.8 KB
ID:	9950  
francoisps likes this.
LVPhx is offline  
post #10 of 12 (permalink) Old 08-12-2019, 08:39 PM
Junior Member
 
Join Date: Aug 2019
Posts: 1
Nice bike mate! Just wondering if there were any modifications needed to be made to the hp3 exhaust to make it fit the g310gs? Dominator says 9n their website that it is designed for the r ann not available for the gs.
Benbo89 is offline  
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Forum Replies Last Post
Just brought home a blue one fais310 BMW G310 Owners Registry And Check In Area 6 04-27-2018 02:57 PM
Hello from the Home Counties UK. Defender BMW G310 Owners Registry And Check In Area 3 01-18-2018 04:15 PM
The gs home and first 5miles tonnetje BMW G310GS Pictures And Videos 7 10-25-2017 03:48 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome