Stalling - BMW G310 R/GS Forum
LinkBack Thread Tools
post #1 of 20 (permalink) Old 10-04-2017, 11:58 PM Thread Starter
Junior Member
Join Date: Sep 2017
Posts: 18

Hi Guys

I just got my G310R delivered today, first bike. I took it out for half an hour but I keep stalling from stop pretty often. Any advice?

Thanks in advance!
shan7m3 is offline  
Sponsored Links
post #2 of 20 (permalink) Old 10-05-2017, 04:19 AM
Senior Member
Join Date: Sep 2017
Location: Northern Waitakeres, New Zealand
Posts: 142
Sounds like you are probably letting the clutch out too quick with not enough revs - its a progressive thing. From idling, when you take off, begin to open the throttle gently as you release the clutch lever gently and smoothly while the revs increase. You'll get used to it.
NZWestie is offline  
post #3 of 20 (permalink) Old 10-05-2017, 08:46 AM
Senior Member
Ligkonakos's Avatar
Join Date: Jul 2017
Location: Rhodes, Greece
Posts: 169
Send a message via Skype™ to Ligkonakos
As a first time rider also, one thing that helped tremendously was the advice "don't increase throttle, just have it steady and learn to release the clutch". Not sure if I heard it from the forums or from a friend, but it helped me not stall until I got the hang of it.
snowboarder1493 likes this.
Ligkonakos is offline  
post #4 of 20 (permalink) Old 10-05-2017, 10:42 AM Thread Starter
Junior Member
Join Date: Sep 2017
Posts: 18
Thanks guys I'll keep practicing!
shan7m3 is offline  
post #5 of 20 (permalink) Old 10-05-2017, 12:57 PM
nhbmw's Avatar
Join Date: Sep 2017
Posts: 32
As everyone has mentioned, it just takes practice. The friction zone on the clutch is pretty far out in the reach of the lever so it takes some getting used to.
nhbmw is offline  
post #6 of 20 (permalink) Old 10-05-2017, 06:53 PM
Super Moderator
porth's Avatar
Join Date: May 2017
Location: Brisbane Australia
Posts: 871
Yep, stalled a couple of times early on, as mentioned above you'll just have to practice, and give it a bit of throttle (not too much, not to little).
porth is online now  
post #7 of 20 (permalink) Old 10-05-2017, 07:51 PM
Join Date: Jun 2017
Posts: 46
To simplify the process, truth be told you don't need throttle for the bike to move. If you're just learning, try JUST learning where the friction zone is on the bike. Let the clutch out until the bike starts to move. Immediately pull the clutch back in. Brake. Repeat...Repeat...Repeat...Repeat.

Once you get that down, then you can begin to add throttle. Keep in mind, throttle means nothing to you if you can't get the clutch action down confidently.

Be patient, be nervous, be embarrassed, and enjoy every minute of it. You're practicing a skill that you'll have for the rest of your life. It's awesome!!!
MandatedMotorvation is offline  
post #8 of 20 (permalink) Old 10-06-2017, 01:01 AM Thread Starter
Junior Member
Join Date: Sep 2017
Posts: 18
Thanks for the advice guys used it did 25miles+ and only stalled once today!

Also I took some pictures as well
Attached Thumbnails
Click image for larger version

Name:	2.jpeg
Views:	217
Size:	117.4 KB
ID:	1569   Click image for larger version

Name:	1.jpeg
Views:	249
Size:	319.0 KB
ID:	1577  
shan7m3 is offline  
post #9 of 20 (permalink) Old 10-07-2017, 06:29 PM
Junior Member
Ken's Avatar
Join Date: Mar 2017
Location: Saline, Fife, Scotland
Posts: 23
I’m finding the 310 does stall, very easily...and is then sometimes hesitant to start first time. As many say, overtime with practice, you’ll find that biting point with just the right amount of revs to pull away. A mate whose been riding motorbikes all his life, kept slagging me off for stalling...until, he had a shot of the bike, and he stalled everytime too! So, it’s definitely something you need to get use to

Last edited by Ken; 10-07-2017 at 06:32 PM.
Ken is offline  
post #10 of 20 (permalink) Old 10-09-2017, 03:26 AM
Junior Member
Join Date: May 2017
Posts: 23
I have seen this mentioned in a YouTube road test as well (easily stalled by an experienced rider.)
draco888 is offline  

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome