BMW G310 R/GS Forum banner
1 - 7 of 7 Posts

· Registered
Joined
·
106 Posts
Discussion Starter · #1 ·
Are the bar slider bolts threaded normal(right tight, left lose) or reverse?
 

· Registered
Joined
·
106 Posts
Discussion Starter · #3 · (Edited)
Righty tighty, lefty loosey.
Thanks much. I’ve not dealt with theses before so wasn’t sure how they worked. They seem awfully tight and I don’t wanna strip them. Ride safe.
 

· Registered
Joined
·
469 Posts
Lol, I struggled with these too.
Gave up with the L shaped hex key.
Used a socket hex and had to wrap the bar ends with tape(they started to spin) and hold them with vice grips.
 

· Registered
Joined
·
106 Posts
Discussion Starter · #6 ·
Lol, I struggled with these too.
Gave up with the L shaped hex key.
Used a socket hex and had to wrap the bar ends with tape(they started to spin) and hold them with vice grips.
Yeah I’m gonna use tape on the end and ill use a soceket hex as well, thx.
 

· Registered
Joined
·
291 Posts
On my GS my bar end weights have Torx headed screws. Sadly for me I didn’t know this and put a hex Allen key in and started trying to loosen..... stripped the inside of the socket so now nothing would fit. Ended up having to drill out the head and replacing it with a hex socket head screw! A 5 minute job ended up taking 1 hour!


Sent from my iPhone using Tapatalk
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top