[PhilG]

Hi G310 team! What did I do for my bike for the last time:
Radiator protection
View attachment 15431
Very simple and cheap top case
View attachment 15432 View attachment 15433
additional head light BMW style
View attachment 15434
View attachment 15440
side cases
View attachment 15436
large wind glass
View attachment 15439
and in all photos you can see crash bars, Russian producer “Crazy Iron”

Which BMW bag is that on the tail? That looks nice.

 

[Denis_vp]

Which BMW bag is that on the tail? That looks nice.

This is 50% handmade bag. I bought fishing bag and upgraded it.

18.48US $ 27% OFF|Multifunctional Fishing Bag Oxford Fishing Reel Lure Gear Storage Case Outdoor Carp Fishing Tackle Shoulder Crossbody Bags PJ139|Fishing Bags| - AliExpress

Smarter Shopping, Better Living! Aliexpress.com

a.aliexpress.com

New mounting system using a belt:

 

[Luma]

Installed lower pegs on my g310r.

Legroom

The only thing that I do not like on my 2018 g310r is lack of legroom, especially when I step off my primary bike a 2009 r1200gs which has lowered pegs. I have been doing some searches and I think I found something on Aliexpress that could be used/modified for the 310. It should give me some...

www.g310rforum.com

 

[Dogeeseegod]

Custom tail tidy, designed and constructed by my 13 year old nephew also swapped the front sprocket to 17 tooth! Custom license plate mount as well.

 

[bbbelanger]

impressive 13 year old !

 

[arkzooky]

Added cheap side panniers from Harbor Freight. Bike (used) came with one on top which I removed and replaced with a "Givi" large enough to hold my helmet (Not as large as it looks in the photo). So all I had to do was buy one "3800" size for 29 bucks and WALLA--I had two which mounted to my givi racks already on the bike. On the exhaust side I added a section of "fel pro" gasket material (not shown) for a heat shield

 

[Makedon]

@arkzooky . Those HF boxes look great on the bike. How did you attach them to the GIVI rack??

 

[arkzooky]

@arkzooky . Those HF boxes look great on the bike. How did you attach them to the GIVI rack??

3 bolts each side. On on top (had to make an aluminum bracket) and two on the bottom with stainless fender washers on the inside. The racks are threaded for the M-6X1 bolts, but I ran them clear through and added a nylock nut. The Tusk panniers that came on the bike went on my Honda NC750X, as thats what I will ride when MC camping.

 

[Worldbeater]

A lot.

LED headlight, Dominator exhaust Hyperpro suspension, higher BMW seat, higher steer + windschreen, wheel/rim stickers, hand protectors, headlight protector, rear mud guard, front mud guard.

 

[Dogeeseegod]

A lot.

LED headlight, Dominator exhaust Hyperpro suspension, higher BMW seat, higher steer + windschreen, wheel/rim stickers and hand protectors.

View attachment 15472

View attachment 15473

View attachment 15474

That bike is looking fantastic!

 

[Eccles]

LED headlight, Dominator exhaust Hyperpro suspension

That will be a awesome ride, exhaust and suspension mods make a good bike great.

Tip: Locate those two small nuts and bolts that came with the Dominator and bolt them through the two small holes in the exhaust bracket, the bracket will eventually fracture at that point without them.

 

[Worldbeater]

That will be a awesome ride, exhaust and suspension mods make a good bike great.

Tip: Locate those two small nuts and bolts that came with the Dominator and bolt them through the two small holes in the exhaust bracket, the bracket will eventually fracture at that point without them.

Yes, the ride is great.
In twisty roads it acts like a sportbike.
Just put the throttle to narrow corners.
The suspension has been changed after approx. 500 km.

For warranty reasons the dealer has installed the exhaust for me.
Recently I have replaced the bolts on the cilinders with titanium ones, but you mean bols at the bracket(?).

I started with another Dominator exhaust, but it was too loud.

Currently received another dB killer, have to test it..

 

[Eccles]

Yes, the ride is great.
In twisty roads it acts like a sportbike.
Just put the throttle to narrow corners.
The suspension has been changed after approx. 500 km.

For warranty reasons the dealer has installed the exhaust for me.
Recently I have replaced the bolts on the cilinders with titanium ones, but you mean bols at the bracket(?).

Yes, the two M4 nuts and bolts. Mine lasted about a month before the bracket failed at that point, replacement with the two M4's, no issues.

 

[DAAT]

Yesterday finally made it! I think is one of the best upgrades talking about comfort and driving experience that I have been doing to my bike. Changing the OEM steel handlebar for a Protaper SE and of course DIY is a must. I have been reading to place some raisers but to me thats don't change nothing about the horrible twist wrists effects that the OEM "Y" shape produces on me. It wasn't easy to find the rigth bend so i bet to the KLX110 with 143mm height that is a few mm higher than OEM, but more as a "T" shape, at the beginnig once received and taking measurements I thought it don't going to fit on the clamp area due to the weird shape of the GS, but fortunetly it done and the result is awsome!

 

[Nralien]

Getting ready learn to ride dirt and to drop it.

 

[Blue_Meanie]

A few more mods finished today. Colour coded belly pan, chain guard & rear tyre hugger. Just installed a new screen too. On the whole, I'm pretty pleased with the result. Next thing to save up for? A Yoshi full system exhaust. Might have to wait a while for that one. Good job I'm a patient man!

 

[Nralien]

A few more mods finished today. Colour coded belly pan, chain guard & rear tyre hugger. Just installed a new screen too. On the whole, I'm pretty pleased with the result. Next thing to save up for? A Yoshi full system exhaust. Might have to wait a while for that one. Good job I'm a patient man!
View attachment 15600 View attachment 15601
View attachment 15599

Tire hugger looks great

 

[porth]

Added an apple airtag. I took the speaker out of the airtag and hid it deep within the bike, works really well. A thief won't be able to disable the airtag if they can't find it.

 

[bilash31]

Ok I am going to start by disclosing this all wasn’t done “today” but it was all recently

Added some protection.

Using other member suggestions like @porth I went led using beamtech H4 and Philips 194WLED
Before and after

Tidy-ed up some exposed wiring from my USB port install. Before and after. Used some wire loom sleeve from Alex Tech off Amazon

And lastly added an external mounted sae connector from optimate. It is an sae to sae attached to the permanent one my dealer installed before purchase

She’s starting to come together.
Any questions, just let me know.

 

[[email protected]!0]

Radiator guard