BMW G310 R/GS Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
69 Posts
Discussion Starter · #1 ·
Got a Christmas present for myself - Wunderlich center stand for the 310GS. Installation was pretty straightforward BUT backing out the chain idler wheel bolt to permit access for the spring bracket was a bit puzzling. Taking off the nut, the bolt didn't want to move in the bearing for the idler. Had to tap it back about 3/8" with a drift and hammer and then it loosened up.

Pretty happy with the end result.
Tire Wheel Automotive tire Automotive lighting Tread
 

Attachments

· Registered
Joined
·
2 Posts
When I first installed my new Wunderlich center stand on the 310 GS I thought it was too low and I was worried about the ground clearance, but it never gave me any problems riding the bike over deep sand. I guess it’s well designed by Wunderlich to maintain the bike’s original high ground clearance. I use it everyday, very useful and much needed.
 

· Registered
GS 310
Joined
·
25 Posts
Hi together,
I have a center stand from Wunderlich for my GS. Unfortunately they don't have it for my wife's G310R. But I get one from T-Rex racing in Texas. Now we are set. I think it is a must have on a bike with chain drive. The maintenance is so much easier.
 
1 - 4 of 4 Posts
Top