Just today, I replaced the stock clutch lever with an adjustable unit from Puig, the Clutch Lever 2.0. I have an equivalent brake lever on the way too. To replace the levers, you must buy two parts: the lever mount, and the lever itself.
https://www.revzilla.com/motorcycle/puig-clutch-lever-20
https://www.revzilla.com/motorcycle/puig-clutch-lever-mount?rrec=true
The mount is model specific, and Puig does make it for the G310R, which should fit the GS, and apparently also fits the G650GS.
I bought both brake and clutch levers and mounts from Revzilla. Including state sales tax, it's around 200 dollars total. It's more expensive than the no name Chinese ebay specials, but I also did not trust the no name Chinese ebay specials.
Installation was a breeze. I bought the blue lever, which matches the blue G310R perfectly. I am absolutely thrilled with the appearance. I can also verify that the clutch lever will not interfere with the high beam flash like the no-name Chinese made levers, even when you set the lever at the closest position.
Overall quality is very good, and installation was pretty simple. There are 6 adjustable positions, from position 1 (close) to position 6 (far). The stock lever feels about the same as Puig's position 3 (see picture for a rough reference), so you can get a little closer, or farther if you're the type who can palm a basketball.
I put mine down to position 1 and found it just right for my relatively small hands. Previously, I had to really reach, and my shifts were sometimes less than perfect because I didn't have the fine control I wanted, and the engagement point is so far out already. Now, I have extremely fine, precise control. I'm less fatigued, and even rev matching to downshift is so much easier. Honestly, it feels like a whole new bike, and I haven't even received the brake lever yet.
5/5 - I really like this clutch lever, and I expect the brake lever will be just as good - it shipped separate so I'll have to wait a couple more days.
https://www.revzilla.com/motorcycle/puig-clutch-lever-20
https://www.revzilla.com/motorcycle/puig-clutch-lever-mount?rrec=true
The mount is model specific, and Puig does make it for the G310R, which should fit the GS, and apparently also fits the G650GS.
I bought both brake and clutch levers and mounts from Revzilla. Including state sales tax, it's around 200 dollars total. It's more expensive than the no name Chinese ebay specials, but I also did not trust the no name Chinese ebay specials.
Installation was a breeze. I bought the blue lever, which matches the blue G310R perfectly. I am absolutely thrilled with the appearance. I can also verify that the clutch lever will not interfere with the high beam flash like the no-name Chinese made levers, even when you set the lever at the closest position.
Overall quality is very good, and installation was pretty simple. There are 6 adjustable positions, from position 1 (close) to position 6 (far). The stock lever feels about the same as Puig's position 3 (see picture for a rough reference), so you can get a little closer, or farther if you're the type who can palm a basketball.
I put mine down to position 1 and found it just right for my relatively small hands. Previously, I had to really reach, and my shifts were sometimes less than perfect because I didn't have the fine control I wanted, and the engagement point is so far out already. Now, I have extremely fine, precise control. I'm less fatigued, and even rev matching to downshift is so much easier. Honestly, it feels like a whole new bike, and I haven't even received the brake lever yet.
5/5 - I really like this clutch lever, and I expect the brake lever will be just as good - it shipped separate so I'll have to wait a couple more days.
