[MandatedMotorvation]

Yes, the idle engine speed 3-4K rpms
Sorry for my poor English ^^

You're English is not bad. I wanted to make sure I understood your problem.

Agreed with above, take it to the dealer. Problem will get solved easily.

 

[bestjita]

Update!!!
Today I take my G310R To dealer.
They found a screw loosen and make Throttle Valve Housing mistake operation.
So, Intake Air volume is mistake and idle rpm is high.

1. Solve problem --> add bolt for lock this screw & add Threadlocker, Service man confirm to me,that can not happen again.
2. Why this screw loosen? --> because the Threadlocker melt from high temp engine. and make this screw loosen
3. How many case like this? --> More than 3 case in other branch dealer.
3. How about dealer countermeasure plan, Thailand Dealer have meeting about recall all customer for add the lock bolt plan. (Just plan).
I think they can do it because Thailand start sale this model since Aug 2017. there are not much of customers.

 

[imedemit]

good info..

why not you snap a pic..then it will help another

 

[bestjita]

good info..

why not you snap a pic..then it will help another

Sorry, I just have this picture
Because I take to Dealer and go back, and in afternoon Service man send infrmation to me.

 

[imedemit]

thank you man..?

 

[Bas310]

👍
Hope this will help us all if this is a ‘overall’ problem

 

[R1deS1uT]

Thank you for all suggestion.
Yesterday I found new problem. OMG!!!
The Engine rpm is high, even at neutral, 1st & 2nd Gear. (3000-4000rpm)
But in 4th-6th Gear is normally.
In morning is normally but after I ride it about 10 km. when I shift down to 1st Gear, Engine RPM still 3500 (like a fill in Throttle but I didn't)
And 1st-2nd gear the motorcycle can run without fill in Throttle (because engine is 3500 rpm)
I check the Throttle wire, harness is normal.
I think it's about intake air system (O2 sensor, leakage of intake hose)
I will take to Dealer within this week (T^T)

I have this problem, started today, idle reving at 4000rpm. Thanks for the tip tonnetje.

bestjita Update!!!
Today I take my G310R To dealer.
They found a screw loosen and make Throttle Valve Housing mistake operation.
So, Intake Air volume is mistake and idle rpm is high.

1. Solve problem --> add bolt for lock this screw & add Threadlocker, Service man confirm to me,that can not happen again.
2. Why this screw loosen? --> because the Threadlocker melt from high temp engine. and make this screw loosen
3. How many case like this? --> More than 3 case in other branch dealer.
3. How about dealer countermeasure plan, Thailand Dealer have meeting about recall all customer for add the lock bolt plan. (Just plan).
I think they can do it because Thailand start sale this model since Aug 2017. there are not much of customers.

 

[tonnetje]

glad to hear you found the tread
that,s why this forum is important
its all about helping each other out 0

 

[R1deS1uT]

glad to hear you found the tread
that,s why this forum is important
its all about helping each other out 0

absolutely

 

[R1deS1uT]

High idle sorted

Got my 310GS back from the workshop, with its first 1000k service and the high idle problem sorted thanks to this thread. "Idle set screw found loose, lock nut fitted to prevent furthur movement"

I was able to to print out bestjita's thread and pass it over to the mechanic. The bike purred all the way home, engine much less chatty and bedding in nicely. Thanks bestjita and tonnetje

 

[porth]

Got my 310GS back from the workshop, with its first 1000k service and the high idle problem sorted thanks to this thread. "Idle set screw found loose, lock nut fitted to prevent furthur movement"

I was able to to print out bestjita's thread and pass it over to the mechanic. The bike purred all the way home, engine much less chatty and bedding in nicely. Thanks bestjita and tonnetje

Could that be causing the cold start issue as well?

 

[luckmeister]

**** im gonna check the tightening right away

 

[rjwyatt]

Anybody have a picture of what this is supposed to look like? My bike started idling around 3500 rpm yesterday and this thread has my attention as I try to figure out why.

 

[#gs310GS77]

Hi I had the same and it was a loose battery connection

 

[rjwyatt]

Hi I had the same and it was a loose battery connection

Loose battery connection was causing a high rpm on idle? I'm not sure I understand how that would work. Can you give more details?

 

[rjwyatt]

Resolution of my issue:

https://www.g310rforum.com/forum/15...153-engines-technical-discussion/8782-idle-around-3500-4000-rpms.html#post96118

 

[LeakyTailpipe]

I've had this happen twice now in a week (on both of the long rides I've taken). Battery cables are tight. Both times the indicator lights stay off when the bike is turned off then on again.

I stopped by the dealership immediately after the lights came on the first time. When they turned the bike on there were no warning lights and no history of an engine fault, only the ABS fault. They weren't convinced I actually saw a warning light, so I sent them this pic in an email. I'll update with their response.

 

[LeakyTailpipe]

In my case, the computer wasn't reading the front wheel speed sensor correctly and was shutting off the ABS. This apparently triggers both the ABS and check engine lights. Everything looked good with the sensor and cable, so they gave me a software update. So far, no new codes.

 

[Jas247]

I have this problem, started today, idle reving at 4000rpm. Thanks for the tip tonnetje.

bestjita Update!!!
Today I take my G310R To dealer.
They found a screw loosen and make Throttle Valve Housing mistake operation.
So, Intake Air volume is mistake and idle rpm is high.

1. Solve problem --> add bolt for lock this screw & add Threadlocker, Service man confirm to me,that can not happen again.
2. Why this screw loosen? --> because the Threadlocker melt from high temp engine. and make this screw loosen
3. How many case like this? --> More than 3 case in other branch dealer.
3. How about dealer countermeasure plan, Thailand Dealer have meeting about recall all customer for add the lock bolt plan. (Just plan).
I think they can do it because Thailand start sale this model since Aug 2017. there are not much of customers.

Does any one have picture of throttle housing /,where air screw is located, many thanks

 

[Jas247]

Sorry, I just have this picture
Because I take to Dealer and go back, and in afternoon Service man send infrmation to me.

Where is location? Does any one know and have pictures many thanks